GATE 2021 Analysis for ME by THE GATE COACH
It is to be noted that the questions are based on the memory of the students. The official question papers will be available shortly after February 12, 2021. The analysis for the GATE 2021 ME Paper in session 1 & 2 has been mostly moderate to easy. Most of the questions were based on direct concepts. The weightage given to topics like Fluid Mechanics, Mechanical Precision Engineering and Strength of Materials was relatively higher when compared to earlier years. Most surprising in this paper was the General Aptitude section which was found to be comparatively tougher when compared to last year.
GATE 2021 Analysis for Mechanical Engineering by THE GATE Academy
Details of Topics Percentage wise for Session 2:
S.No | Topics | % wise weightage |
1 | Engineering Mathematics | 14% |
2 | Theory of Machines & Vibrations | 14% |
3 | Strength of Materials | 13% |
4 | MPE | 14% |
5 | Fluid Mechanics | 12% |
6 | Heat Transfer | 7% |
7 | Thermo Dynamics | 12% |
8 | Industrial Engineering | 9% |
Detailed GATE 2021 Analysis for ME (Session2):
Subject Topics | No.Of Questions | Topics in detail | Difficulty Level | Total Marks |
Strength of Materials (SOM) | 1 marks – 5
2 marks – 3 |
Maximum shear stress, Fatigue loading,
Thermal stresses, Bending moment |
Easy | 11 |
Theory of Machines (TOM) and
Vibration |
1 marks – 2
2 marks – 5 |
Vibrations, | Easy | 12 |
Thermo Dynamics & Applied Thermo Dynamics | 1 marks -2
2 marks – 4 |
Psychometry, | Moderate | 10 |
Mechanical Precision Engineering | 1 marks -4
2 marks – 5 |
Material science, Forming, USM, Crystal structures, Metal cutting, Tool life, | Easy to Moderate | 12 |
Fluid Mechanics | 1 marks – 4
2 marks – 3 |
Divergence, Stability of floating Body, Fluid kinetics, Turbines | Easy to Moderate | 10 |
Heat & Mass Transfer | 1 marks – 2
2 marks – 2 |
Radiation, Fins, Unsteady state heat conduction | Easy to Moderate | 6 |
Machine Design | 1 marks – 0
2 marks – 2 |
Easy to Moderate | 4 | |
Industrial Engineering | 1 marks – 2
2 marks – 3 |
Queuing theory, Standard deviation | Moderate | 8 |
Engineering Mechanics | 1 marks – 0
2 marks – 0 |
– | 0 | |
Engineering Mathematics | 1 marks – 4
2 marks – 4 |
Mode, Probability, | Moderate | 12 |
General Aptitude | 1 marks – 5
2 marks – 5 |
Family Relations, Grammar, Inference, Coordinate Geometry | Tough | 15 |
Total | 65 | 100 |
Details of Topics Percentage wise for Session 1
S.No | Topics | % wise weightage |
1 | Maths | 14% |
2 | General Aptitude | 15% |
3 | Engineering Mathematics | 5% |
4 | Theory of Machines | 7% |
5 | Machine design | 4% |
6 | Fluid Mechanics 10 | 10% |
7 | Heat Transfer5 | 5% |
8 | Thermo Dynamics | 9% |
9 | Manufacturing Engineering | 17% |
10 | Industrial Engineering | 4% |
Detailed GATE 2021 Analysis for ME (Session 1)
Subject Topics | No. Of Questions | Topics – Questions were asked from | Difficulty Level | Total Marks |
Strength of Materials (SOM) | 1 marks- 4
2 marks- 3 |
Poisson’s Ratio, Columns, | Easy | 10 |
Theory of Machines (TOM) and
Vibration |
1 marks- 1
2 marks- 3 |
Natural Frequency, Dynamics of Slider Crank Mechanism, Epicyclic Gear Trains | Easy | 7 |
Thermo Dynamics & Applied Thermo Dynamics | 1 marks -1
2 marks- 4 |
Brayton Cycle, Entropy | Moderate | 9 |
Mechanical Precision Engineering | 1 marks -5
2 marks – 6 |
Slab Milling, non-traditional machining, Casting, Welding | Easy to Moderate | 17 |
Fluid Mechanics | 1 marks – 4
2 marks – 3 |
Flow through Pipes, Kinematics | Easy to Moderate | 10 |
Heat & Mass Transfer | 1 marks – 1
2 marks – 2 |
Conduction, Heat Exchanger | Easy to Moderate | 5 |
Machine Design | 1 marks – 2
2 marks – 1 |
S-N Curve, Theories of Failure | Easy to Moderate | 4 |
Industrial Engineering | 1 marks – 0
2 marks – 2 |
Scheduling | Moderate | 4 |
Engineering Mechanics | 1 marks – 1
2 marks – 2 |
Tough | 5 | |
Engineering Mathematics | 1 marks – 5
2 marks – 2 |
Differential Equations, Probability, Rank of the Matrix, Eigen Values | Moderate | 14 |
General Aptitude | 1 marks – 5
2 marks – 5 |
Family Relations, Grammar, Inference, Coordinate Geometry | Tough | 15 |
Total | 65 | 100 |
Don’t wait for the GATE 2021 Result. Use the Gate 2021 Rank Predictor and know your probable GATE rank. To understand the minimum GATE scores required for the IITs and the NITs, check the GATE 2021 Cutoff marks.
Recent Comments